Product ID:L9-003 TPD-1000A, TYPE 1 HEAT RESISTING PAINT
MSDS Date:01/17/1997
FSC:8010
NIIN:01-344-5120
MSDS Number: CCMBR

CRAWFORD LABORATORIES, INC.

4165 SOUTH EMERALD AVENUE
CHICAGO, IL 60609
US

Emergency Phone: 800-424-9300 CHEMTREC

Info Phone: 773-376-7132

Cage: DO165

CRAWFORD LABORATORIES, INC.

UNKNOW CHICAGO, IL 60609

Telephone: 800-424-9300 CHEMTREC

Cage: 5V120

NAPHTHA, LIGHT AROMATIC (SOLVENT NAPHTHA)

CAS: 64742-95-6

RTECS: WF3400000

Fraction By Weight: 20-50%

ALUMINUM FLAKE OR ALUMINUM (SARA 313)

CAS: 7429-90-5

RTECS: BD0330000

Fraction By Weight: 5-20%

OSHA PEL 15 MG/M3 DUST

ACGIH TLV: 10 MG/M3 DUST; 9596

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGESTION MAY CAUSE VOMITING.
INHALATION MAY CAUSE CNS EFFECTS, IRRITATION OF MUCOUS MEMBRANES.
EYE CONTACT MAY CAUSE SEVERE EYE IRRITATION, POSSIBLE DAMAGE. SKIN
CONTACT MAY CAUSE IRRITATION, DERMATI TIS, SENSITIZATION.
Explanation of Carcinogenicity:NO INGREDIENT OF A CONCENTRATION OF 0.1%
OR GREATER IS LISTED AS A CARCINOGEN OR SUSPECTED CARCINOGEN.
Effects of Overexposure:INHALED-HEADACHE, DIZZINESS, NAUSEA, LOSS OF
CONSCIOUSNESS. INGESTED-VOMITING. SKIN-DEFATTING, DRYING,
IRRITATION, DERMATITIS, SENSITIZATION. EYES-SEVERE IRRITATION, EYE
DAMAGE.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:IN ALL CASES GET MEDICAL ATTENTION. EYES-FLUSH WITH WATER FOR
15 MINUTES, LIFT LIDS. SKIN-REMOVE CONTAMINATED CLOTHES. WASH WITH
MILD SOAP & WATER. INHALED-REMOVE TO FRESH AIR. ADMINISTER OXYGEN
OR AR TIFICIAL RESPIRATION AS NEEDED. INGESTED-CONTACT PHYSICIAN
IMMEDIATELY. ONLY IDUCE VOMITING ON INSTRUCTION OF PHYSICIAN.
NOTHING BY MOUTH IF UNCONSCIOUS.

Flash Point Method:TCC
Flash Point:108F,42C
Lower Limits:1.9
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR SELF-CONTAINED BREATHING APPARATUS AND
FULL FIRE FIGHTER'S PROTECTIVE GEAR. USE WATER TO COOL FIRE EXPOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:WATER PRESSURE MAY SPREAD A COMBUSTIBLE
LIQUID FIRE. SEALED CONTAINERS MAY EXPLODE IF OVERHEATED.

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. HANDLING
EQUIPMENT MUST BE PROPERLY BONDED/GROUNDED. TOOLS MUST BE
NON-SPARKING. WEAR PROPER PERSONAL PROTECTIVE GEAR. SOAK UP WITH
ABSORBANT AND PLACE IN NON-LEAKIN G CONTAINER(S). SEAL TIGHTLY FOR
DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:TREAT AS ANY HAZARDOUS COMBUSTIBLE
MATERIAL. STORE IN A COOL, DRY PLACE IN BULDINGS DESIGNED FOR
STORAGE OF COMBUSTIBLE LIQUIDS.
Other Precautions:HOT ORGANIC CHEMICAL VAPORS OR MISTS ARE SUSCEPTIBLE
TO SUDDEN SPAONTANEOUS COMBUSTION WHEN MIXED WITH AIR. IGNITION
TEMPERATURES DECREASE WITH INCREASING VAPOR VOLUME AND VAPOR/AIR
CONTACT TIME & ARE INFLUENCED BY PRESSURE CHANGES.

Respiratory Protection:IF ENGINEERING CONTROLS FAIL OR NON-ROUTINE USE
OR AN EMERGENCY OCCURS; WEAR AN MSHA/NIOSH APPROVED RESPIRATOR WITH
ORGANIC VAPOR CARTRIDGE OR AN AIR-SUPPLIED RESPIRATOR OR SCBA, AS
REQUIRED. USE IAW 29 CFR 1910.134.
Ventilation:USE EFFECTIVE ENGINEERING CONTROLS. DLA-HMIS:USE ADEQUATE
GENERAL VENTILATION/LOCAL EXHAUST TO KEEP EXPOSURE BELOW TLV.
Protective Gloves:USE RUBBER GLOVES.
Eye Protection:SAFETY GOGGLES.
Other Protective Equipment:HAVE EYE WASH STATION & SAFETY SHOWER
AVAILABLE.
Work Hygienic Practices:WASH HANDS AFTER HANDLING AND BEFORE EATING,
DRINKING, OR SMOKING. LAUNDER CONTAMINATED CLOTHES BEFORE REUSE.
Supplemental Safety and Health

HCC:F4
Boiling Pt:B.P. Text:300F,149C
Vapor Pres:9
Vapor Density:>1
Spec Gravity:1.1639
Evaporation Rate & Reference:0.18 (N-BUTYL ACETATE=1)
Appearance and Odor:ALUMINUM LIQUID.
Percent Volatiles by Volume:47.1

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ALKALIS.
Stability Condition to Avoid:AVOID HEAT, SPARKS, OPEN FLAMES AND
INCOMPATIBLE MATERIALS. ALSO, AIRCRAFT TRANSPORT MUST BE IN STRICT
ACCORDNACE W/REGS
Hazardous Decomposition Products:INCOMPLETE COMBUSTION MAY FORM CARBON
MONOXIDE AND OTHER TOXIC GASES.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL ENVIRONMENTAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.